Generally, Linksys is a topmost brand name in the telecommunication market. This is a superb mesh system that is capable of eliminating dead speeds and providing faster internet speeds. But occasionally, users face linksys velop red light issues like other digital devices. However, this problem occurs as solid or flashing on your Velop networking device.
Besides this, it is necessary to understand the root causes behind this issue and then fix it by following the suitable methods. Likewise, if you experience such types of problems, then just read this guide. Here, you find detailed information regarding the linksys velop flashing red light, so keep reading!
Why is the red light on my Linksys Velop?
Before we proceed with the troubleshooting methods to fix the red light on the Linksys Velop, we must understand the solid and blinking red light and the reasons behind this. So, walk through the below-section:
Velop Solid Red Light
The solid red LED on the Velop appears if the primary router does not detect the internet connection or hardware failure.
Linksys Velop Flashing Red Light
This indicates that the router is disconnected from the modem or the nodes are not detected by the primary router’s network.
Reasons for red light
- Unstable network/Signal interferences
- The router & modem are not connected
- Damaged cables/Adaptor/router/nodes
- Far distance between the master router and the nodes
- Internet issues from the ISP side
- Outdated firmware/Corrupted file run on router
- Faulty WAN port
- Loose cable connection
What are the quick ways for linksys velop troubleshooting red light?
Additionally, the red light on the Velop indicates the different causes. So, from the above-discussed section, you well understand the reasons behind this error.
After finding the exact cause behind the Linksys Velop mesh router red light problem, it’s time to get suitable troubleshooting tips to resolve it. In the below section, we share the effective fixes for the red light issue, have a look once:
Stabilize the network connection
If you are linked to the wireless network and have issues with it, then use the ethernet cables to stabilize it. This will steady the network signals and you can enjoy seamless connectivity without any red light error.
Eliminate the signal obstructions
The red light on the velop sometimes appears due to the presence of signal interference. These can be electromagnetic devices, cordless phones, mirrors, furniture, etc. So, remove them away from the router or relocate your Velop to a central location.
Reconnect the modem & router
Occasionally, the loose cable connections and damaged network cables are responsible for the Linksys Velop solid red light. Therefore, it is necessary to resolve the modem and Velop master router properly and replace the damaged cables if needed.
Place the Parent & Child nodes closer
Generally, if the parent and child nodes are farther from each other while connecting or nodes are not linked to the master router, as they are out of network range, then the red light issue is common. So, to fix this, place the parent and child nodes closer to each other while connecting. After linking them, position nodes within the primary router’s network range.
Contact your ISP authority
If there are continued connection drop-offs or poor signals, then you must contact your ISP authority. This may also happen if the network customization is restricted by the ISP side. So, connect to them and follow the guidelines they explained to you.
Power cycle the Velop
If you face continued connectivity issues and slower router performance, then power cycle the Velop parent node. It is also helpful to get rid of the technical glitches and bugs. For this, power off the router, nodes, computer, and modem and unplug for 30 seconds. After that plug them back and check if the issues get fixed.
Use original adaptor/cables
If you are using a duplicate power adaptor or network/power cables, then there may be issues in connectivity. So, prefer to use the original accessories for your Velop mesh networking device and this will help to prevent connectivity and power issues.
Check the cable connections
Make sure all the cable connections are tightened enough and cables are linked to the accurate ports. Also, check for the damaged WAN port and hardware, if present then replace it immediately.
Upgrade the Velop firmware
If your Velop mesh runs on an outdated firmware version or there is the presence of a corrupted firmware file, then the appearance of the linksys velop red light is common among the users. Hence, access the admin panel and check the window for Firmware updates. If it prompts, then follow the instructions to complete the procedure or reach us to know more. Also, eliminate the corrupted file and install the compatible and latest version of the firmware file.
Factory reset the Velop router
If nothing else works to fix the red light error on your Velop router, then the factory reset it. This will bring back your networking device to its default settings and you have to reconfigure it from scratch. If you want to know the complete factory reset process, then approach us!
Wrapping Up
All in all, the given information will help you to understand the linksys velop red light issue briefly. Here, you find the responsible causes and easy troubleshooting methods to resolve this red light error. If you still need to know more about Velop gadgets, then stay in touch with us here!